One-piece Toilets Have Many Advantages
Two-piece toilets are generally the same as one-piece units, but often have a lower price. Why are single-piece toilets so popular? What are the benefits of single-piece toilets?
-
Single-piece Toilets Are EIt Is Easier To Clean
There are no joints or crevices so dirt cannot build up. This is one of the biggest advantages to single-piece units. Because they are less likely to break or cause leakage, they are easier to maintain.
-
Seamless Models Are Fewer Parts (E)It Is Easier To Install
These models can be used in smaller bathrooms because they are usually one-piece. They are also sleeker and will fit well in modern bathrooms. The single-piece toilets are shipped as one unit to avoid shipping problems.
-
There Are No Drilling Holes To Support The Water Tank.
You would need to drill holes for support to a standard 2-piece toilet. Single-piece models won’t pose this problem.
The Top
1. Woodbridge Elongated
Many customers have reported that the Woodbridge toilet looks luxurious due to its clean and sleek design. It is easy to clean, as there are no corners or crevices.
The skirted trap design creates a beautiful look and makes it easy to clean. The dual flush system uses only about 5 Liters per flush, making the Woodbridge model extremely water-efficient. It was tested for water efficiency, and it passed all the requirements of the CSA and UPS.
The toilet also uses a siphoned flushing tube, which reduces noise and prevents leaks, clogs and other problems due to waste. It is lightweight and has a height that allows for both standing and sitting.
The toilet is made from vitreous china. It comes with a pre-installed stool, a wax ring and bolts. There’s also a clear instruction booklet. The packaging also includes a hand wrench to tighten the screws and bolts.
Pros
EPA WaterSense certified
The optimal seat height
The packaging includes all tools and an instruction booklet.
It is easy to clean and simple to install
Adequate noise level
Cons
Sticky porcelain finish
There is very little water in the bowl
It can be hard to attach the water line.
2. 2.
The TOTO toilets feature the Double Cyclone Flush System, which uses minimal water and cleans thoroughly.
Chrome finish protects the trip lever from rusting, scratches and scuff marks. The soft close seat in the front bowl has an extended shape that allows for quiet closing and opening.
The seat has a 17-inch height, making it ideal for both short and tall people.
It is much easier to clean than porcelain and resists rust marks and water. This toilet is also ADA-certified.
Pros
ADA certified
Porcelain toilet
Chrome-plated lever
Flushes with a minimal amount
17 inches universal height
SoftClose Seat
Cons
Quality control is poor
The bottom drain is not symmetrical
Customers have complained of toilets that had a deformed bowl.
3. KOHLER Santa Rosa Elongated Toile Toilet
The Kohler Santa Rose Elongated Toilet has an integrated bowl with tank. This allows for seamless cleaning without crevices or corners.
The seat is a comfortable height and provides a chair-like experience. You will also find the seat and lid in the package. There are clear instructions on how you can set it up and adjust all screws and bolts.
The flush system is water-efficient and canister flushes a strong water push to remove any possible clogs from paper, waste or other debris. Customers have complained that the flush system makes a bit more noise than other models within this price range.
Pros
Brands well-known
Strong flush
Water-efficient
Available in a variety of colors, including black
Cons
Water rings can form on the toilet’s finish.
Seats with low price
According to reports, the flush system parts began to fail after a certain time.
4. 4.
TOTO Ultramax RV toilet is sleek and stylish. It features a flush system that is commercial-grade and has a flush valve measuring 8 cm in width. The trapway has been computer-designed for a super-efficient, clog-free operation over the years.
The model comes in five different finishes, including the CEFIONTECT ceramic. This model is suitable for RVs and households that can handle 17 Liters per flush of water without any back-up.
Its one-piece design means that you won’t have to clean it as often, especially between the tank and the toilet bowl.
Customers report that the model is flawless with strong flushes and low noise levels.
Pros
Low flush noise
It is easy to clean
Seamless design
Available in a variety of finishes
Made in the USA
Cons
Poor design can lead to the flapper and handle breaking.
Very little
The bowl holds very little water
5. TOTO Neorest
TOTO has created this sleek, beautiful ceramic toilet in six colors. TOTO’s skirted tank design and high-profile tank make it easy to clean. The non-stick finish virtually eliminates solid waste sticking.
The soft close seat makes very little sound when it is opened or closed. The cyclone siphon system saves water by using only 0.8-5 Liters per flush.
This model has a remote control that can be used to control the flush and the temperature. This model also features gentle water spray with oscillating and pulsating functions.
Pros
Temperature setting and flushing done automatically, without any manual effort
Sleek design
High water efficiency, only 0.8-5 Liters per flush
Nonsticky surface
7. Kohler K-5401-PA-0 Veil
Most people first notice the toilet’s design. It is so sleek, elegant, and smooth that it almost looks futuristic. It also meets all ADA code requirements, and comes with an upgraded chair.
A special pump assists the flush and it consumes between 0.8 and 6 Liters per flush. The unit can be attached to the main water supply line and is tankless.
Although it is quite expensive, the remote control comes with an LCD LCD display that allows you to adjust temperature and pressure.
Pros
Remote control LCD monitor
Futuristic design
Water-efficient
8. Kohler 3810-7 Santa Rosa
This unit isn’t the most expensive, but it has some amazing features. This unit is ideal for bathrooms because it has a unique seat that prevents accidental banging. It’s also compact and comfortable.
Although the toilet is only available in black, it’s beautiful and some may not like that fact.
Installation is easy and involves an average of 30 cm rough-in. It is easy to clean and maintain because of its single-piece design. This toilet also saves water – up to 16,000 gallons per year – due to its efficient flush technology.
Pros
Conserve water
Beautiful design
Simple to maintain
10. Kohler K-3940-0 Kathryn
Kohler
Kathryn has a unique design. The design is reminiscent of the 1930s, but it has sleek and modern lines. This bathroom accessory is a good choice for all types of bathrooms, modern or traditional.
It is also water-efficient, allowing for a savings of up to 15,000 Gallons per year. However, water-saving does not mean sacrificing performance. The toilet’s AquaPiston technology delivers powerful flushing with just 6 Liters of water.
Pros
AquaPiston technology
Water savings up to 15,000 gallons
Modern and retro design are combined
Cons
Some parts may be slightly weak
11. SaniCanada 932 Elongated
This toilet is not easy to install, but it has many great features. The dual-flush system allows for either a 7 Liters or 0.8 Liter flush. This saves a lot of water each year.
The toilet is easy to clean and requires very little maintenance. The unit also comes with a 5-year guarantee. If there is a problem, they will be happy to assist you.
Pros
High-quality materials
Polite customer service
Buyer’s Guide: Choosing A 1-Piece Toilet
It isn’t always easy to choose the right one-piece toilet. It is not always easy to choose the right one-piece toilet.
Let’s take a look at what you should do when purchasing a one-piece toilet.
Dimensions And Rough-in Requirements
The average toilet will measure 30cm from the wall. This is known as a rough-in dimension. Before you buy, measure. You must ensure that everyone in the family can use the same height seat.
Water Efficiency
Water efficiency offers two benefits. This saves money and helps the environment. However, does less water impact the flush power? Modern toilets only use 6 Liters per flush and still have plenty of power. Toilets can use as much as 7 Liters of water per flush, but toilets that use more than this are not water-efficient.
The belief is that the cleaner the toilet, the more water it uses. This can lead to huge amounts of waste over time. Toilets account for 30% of household water consumption. Modern toilets are more efficient and use less water. You should look for a model that has aWaterSenseLabel
Simple Cleaning
Single-piece models have the obvious advantage of being simple.Easy cleaning. Because the tank and bowl are connected, bacteria cannot form. If you have ever attempted to clean a two-piece bathroom, you will notice the difference. The bowl and tank are both one-piece, so there is little chance of leakage.
High Durability
Toilets are durable because they have fewer parts than other types of equipment. Two-piece toilets have a rubber gasket that can leak over time.
How To Install A 1-Piece Toilet
Although it is very easy to install a toilet such as this, the process can vary from one unit to another.
Turn off the water supply to the toilet and then remove it. Take it out carefully, and then clean up any excess or spillages from the floor. To ensure that your new toilet doesn’t leak, remove the old wax ring. You can use a scraper to remove all remaining wax.
Make sure there are bolt holes in your new toilet. You will need to drill holes in the floor if there aren’t. First, get rid of any extra material that might reach the wax ring.
Once you’re done, it is time to put in the new wax ring. To ensure it is properly centered, stick the wax ring on the toilet. Rotate the wax ring until it fits.
You should hire someone to help with the installation of a new toilet. Bolt it down if the bolts line up properly with the holes in the floor. This can be done with the nuts and washers that are often included in the box.
Next, install the toilet flush and then the toilet seat. Most seats have plastic screws so you will need to place them and then tighten them. Once you’re done, turn off the water and then you can go. You are now ready to use your toilet.
Unique Features
One-piece toilets that are superior to other models have unique features, especially high-quality ones. Let’s find out what they have to offer.
Design & Materials
One-piece models are often compact and have a sleek design that makes them great for small bathrooms.
They can be both convenient and comfortable, but they also come in different heights. Comfort is a matter of personal preference.
The standard height is approximately 38 cm. You might find units with a 16 cm or 43 cm seat height. These extra inches offer good support for both the knees and ankles.
Most toilets are made of ceramic or porcelain. Although you can find toilets made from plastic, they are not as durable. Ceramic or porcelain models are better choices as they don’t leak easily and last longer.
Types Of Toilet Bowl
Longer
Oval bowls are generally better than their round counterparts in all aspects. They are more convenient.More comfortThey are often a few times larger. They are also ideal for children learning how to use an adult bathroom.
Round Bowl
Round bowls are typically 5-15 cm smaller in diameter than elongated, which makes them more practical.Great for small bathroomsThey are. They offer less comfort, however. The price difference between round and elongated units is similar.
Bowl Conforming To The ADA
Toilets with ADA compliant bowls are typically 5 cm smaller than standard toilets. This makes them more comfortable and easier to use. These toilets are a great choice for those with disabilities.
Flush Types
1. 1.
The most popular flushing method is gravity flush. The bowl is cleaned by the pressure created by the water.
It also has
pretty quietIt requires very little maintenance.
2. 2.
These toilets often have an air tank that is under pressure. This creates aMore powerful flushIt is also available in English.noisier. A pressure flush, on the other hand is better at eliminating waste.
3. Dual-Flush
This type has the main advantage of being water-efficient. For liquid waste, you can choose to have it half flushed and for solid waste, it will flush the entire tank. This not only protects the environment but also lowers your monthly water bill.
Advantages
One-piece models also have their disadvantages. They arequite expensive. A cheaper model can pose a risk because they might be made from low-quality materials.
You cannot also replace the toilet bowl if it breaks without purchasing a new one.
For tall people, single-piece toilets may not be the best choice. These toilets often have lower seats, which can be considered a drawback. You can put it a few inches higher if you purchase a wall-mountable toilet.
The main is the finalThere are downsidesOne-piece units are theirWeightThey are. They can be quite heavy and could pose a problem during installation. It is strongly recommended that you hire a professional to install it. A single toilet, even one-piece, can easily weigh in excess of 100 lbs.Up to 100 KilogramsIt is simply too much.
Most Frequently Asked Questions
What is the best one-piece toilet on the market?
The best toilets should be affordable. It is even more desirable if it has a dual flush option. TOTO is the market leader among the many brands we tested. TOTO’s toilets are also very comfortable.
What is the difference between one-piece toilets and two-piece counterparts?
One-piece models have no space between the parts of a toilet. This prevents dirt and other debris from building up. They are also typically low-profile and have a low-height seat.
How easy is it to install a one-piece toilet?
Installing a one-piece toilet should not be difficult if you are able to do basic DIY tasks. To avoid your warranty being voided, however, it is a good idea to call a professional.
Can a 1-Piece Toilet Save Water
One-piece toilets require less water than standard units. This saves water and reduces your monthly water bill.
Are One-Piece Toilets Completely Clean after Flushing?
Yes. These models use less water but have specific flushing mechanisms. These mechanisms make it possible to clean one-piece models with very little water.
